Light is one of the basic needs to help plants grow well; they need maximum exposure to light to carry out photosynthesis. For growing areas in tents or greenhouses, Commercial Grow light should be used.
Most people don't know how to hang the line. Refer to the following article on plant light installation instructions to be able to decide on the right planter light and how to hang it.
Instructions for installing plant Commercial Grow light
Factors to consider when installing lights
Consider the area of space
There's no limit to how big your grow tent can be. There are people who choose to do this on a small space while others choose a fairly large area to be a growing area.
The size of the growing space always tends to determine the number of grow lights to use and how you install the spacing between each light in the space. The larger the space, the more need to use Commercial Grow light and vice versa.
Type of grow lights used
There are many types of grow lights that vary in light output and heat output. Too much exposure to your plants can damage them, even slow them down, or burn them to make their leaves turn pale yellow.
Here's a guide to how you should position your lights based on the amount of light on each grow light:
- The 250 Watt planter bulb can light up a 2 x 2 foot area.
- Planter bulbs from 400 to 600 Watt can light up a 4 x 4 foot area.
- The 1000 Watt planter bulb can light up an 8 x 8 foot area.
Crops can be classified into two groups: long-day plants and short-day plants. In the first case, the light should last for at least 12 hours a day, while the second requires 8 to 12 hours.
Advantages of using Commercial Grow light
Extended life: LED bulbs can naturally extend their lifespan unless there is a serious short circuit, but they rarely burn out.
The bulb is not sensitive to cold temperatures. As long as there is an electric current, the bulb will stay on regardless of the environment.
Type of crops grown
Different plants have different lighting needs. There are types that require more light while there are types that require fairly minimal light.
Peppers and eggplants need more light than tomatoes, in case of low light, they just lose flowers.
In short, plants grown for their leaves to eat need less light than those grown for flowers and fruit.
Even if you focus your energy on researching how to hang lights, always make sure to consider the lighting requirements for the tree you're growing.
- Instructions on how to install photosynthetic lights
- Instructions for installing grow lights 1
- Decide where you want to install theCommercial Grow light
Deciding on the right place to hang your grow lights is not always an easy task. There are specific factors that you need to take into consideration if you want your project to be successful and not damage the plants.
Depending on how large the growing area is, you may need to install 10 grow lights to the max. Evaluate all factors before coming to a decision on where to install the lights to avoid having to add extra work when the initial factors are not effective.
Drill holes to hang the hooks of the Commercial Grow light
LED grow lights are installed by hanging and this means that you have to make holes in the ceiling of the planting area. The holes should not be too big, but just enough to fit the hanger.
If you are unsure about drilling holes to get the right size, you can seek professional help.
Check the light hooks
Once you have drilled the holes, the next thing you need to do is check the hooks you will use to hang your LED grow lights, best to make sure that the hooks are securely fixed, Do not drop the hook even the lamp device.
Hang the LED grow lights on the hook
Hook onto your Commercial Grow light and install it on the area you selected earlier. Each light has a place where you can hook it up and hang it at the top. If these are uncertain, refer to the installation instructions included in the product package.
If you are not able to install the plant lights yourself, you can ask experienced people or professionals.
With the instructions mentioned in the article above, hopefully you can install LED photosynthetic lights for your garden yourself, to provide light for plants to grow and increase yield and output.
However, there are some people who are still worried when choosing to buy LED lights due to having wrong thoughts about it. Articles about Misconceptions about Commercial Grow light.
The LED is not bright enough
It is often confused that power and brightness are correlated. Many people assume that if a lamp consumes more watts, it will also be brighter, but that is not the case.
A standard LED bulb requires only 8 Watt while conventional bulbs need at least 10 times the wattage of Commercial Grow light to produce the same amount of light (lumens).
Watt is used to measure energy consumption and is not a measure of light efficiency or brightness. Especially when it comes to grow lights, other factors such as wavelength, lumen, lux, can be taken into account.
LED grow lights are very expensive
Although LEDs have a higher cost per unit, in the long run they prove to be extremely economical.
A cheap incandescent lamp can last for about 1,200 hours, a typical fluorescent lamp has an average life of about 20,000 hours, and an LED can last up to 50,000 hours.
With a fairly long life and good durability, using Commercial Grow light can help you limit the replacement of other products as well as save maintenance and repair costs.
Using LEDs is very harmful
When not too familiar with LED photosynthetic lights, it may make some people think that it is harmful to the health of users, but this is not accurate.
Like any other publicly sold product, Commercial Grow light has passed the manufacturing process and meets international safety standards.