WHAT TO DO WHEN THE GREENHOUSE HAS ETL LED GROW LIGHT PROBLEM?
As we've always highlighted, making your own homemade greenhouse on ETL LED grow light, usually from a disused piece of furniture, is an experience that every grower can go through as a way to learn more about indoor cultivation.
One of the main ones is the led grow lighting against both the entrance and the exit of light. This can put the planting itself at risk from the lower or higher exposure of the plant to light depending on the planting stage. For those of you who have a homemade greenhouse, we present a “guide” to know what to do when you face a problem with light led grow lighting.
We start with a warning: to ensure a 100% efficient ETL LED grow light lighting the best way is to purchase a ready-made greenhouse because it is a structure to completely shut off light and air.
HOW TO START CULTIVATION IN ETL LED GROW LIGHT?
In the case of home greenhouses, the most important measure to deal with this led grow lighting problems is right at the beginning of cultivation, when the decision comes on where to plant. It is important that the enclosed space seals and that there are no gaps or cracks.
MEASURES NEEDED TO AVOID ETL LED GROW LIGHT PROBLEMS
The fence in the home greenhouse does not necessarily have to come with specific building materials, the idea is just that light and air do not enter or leave, unless that is the intention. In case ETL LED grow light problems arise, the proper procedure is, as soon as possible, to restore the part of the stove that had problems.
But a good urgent measure is to use light proof tapes to close the spaces. Placing a Mylar film , for sale from the Green Power grow shop , if you do not already have one, throughout the greenhouse or in places with led grow lighting problems is also important.
Moreover, the important thing is to try to repair the fault, either temporarily or effectively, as soon as possible so that there is no damage to the plants.
IS MYLAR CONSIDERED AS A PREVENTIVE ITEM?
The Mylar cannot be considered a preventive item against greenhouse ETL LED grow light problems can also because show cracks. However, it is a great tool to ensure that all vases are receiving equal lighting. As it is a highly light-reflecting material, in the event of led grow lighting failures.
Mylar helps maintain photo balance for a longer period of time.
WHAT HAPPENS WHEN THE ETL LED GROW LIGHT PROBLEM IS NOT DETECTED RIGHT AWAY?
An ETL LED grow light problem in the greenhouse can cause complications for the plants in relation to light/photoperiod, but also in terms of air circulation. Generally, led grow lighting problems significant enough. It is to cause serious damage to grow will also be easy to notice.
But if that doesn't happen, the plants can stall or considerably slow down their growth. They're getting less light than they need, for example. Because of this, yellowing of the leaves can occur. With the reduction of the photosynthesis rate, in severe cases, the plant can even die.
Moreover, the opposite is also a problem. Plants need the dark period, both in the vegetative phase and in flowering, to be of total darkness. That is, any light entering the stove at the time of “sleep” affects the regulation of the photoperiod.
ROLE OF AIR CIRCULATION IN GROW LIGHT INSTALLATION
In addition to situations related to light, it is necessary to consider that an ETL LED grow light problem can change the air circulation system. Normally, greenhouses, ready-made or made by the grower themselves, have an air circulation system. This guarantees the plants' respiration and helps to maintain the temperature.
Furthermore, depending on the conditions of the environment outside the greenhouse, a led grow lighting problem can allow air currents. These are colder or warmer than desired to reach the plants, altering the thermal homeostasis of grow.
CAUSE OF PEST’S ATTACK
The attack of pests is another situation that the owner of the crop can face if there is a problem with the ETL LED grow light. Insects in particular tend to take advantage of gaps in the fence. And after entering the greenhouse, they can reproduce and cause an infestation.
TIPS FOR SETTING LIGHTING BASED ON GROW SIZE
Grow lighting is one of the issues that raises most doubts among growers, especially those who are taking their first steps in indoor planting.
LED GROW LIGHTING AND GROW SIZE
In general, a minimum of 30 Watts per square foot is important, but the ideal power should be between 40-80w. We should consider the ETL LED grow light is not totally uniform in all parts of the plants.
Furthermore, to seek the greatest possible uniformity, the owner of the crop can use reflectors, for example. This comes on the quantity and quality of these reflectors. And also consider the good air circulation. We should consider the controlled temperature and the number of vessels, the option is to place a value in this range. So just multiply by the size of grow.
For example, if there are only three pots in this space, a good reflector and air circulation, the cultivator might opt for 40w x 11 ft squared, totaling 440w for the entire space.
HOW LIGHT CAN BE CALCULATED IN CASE OF LUMENS?
Depending on the layout of your plants and tests, sometimes it can be more advantageous to use two 250w ETL LED grow lights instead of a single one with 440w or 500w, aiming at better coverage of the area.
As for the Lumens, now that you have calculated the planting area in square feet, just divide the amount of available lumens (adding the lumens of each lamp) by the size of the grow. The latest research indicates that the minimum for growth is 2,000 lumens per square foot, the average is 5,000, and the ideal is between 7000-7500.